BINARY_S1

Binary (serial port)

TEXT_S1

Text (serial port)

BINARY_P2

Binary (second parallel port)

TEXT_P2

Text (second parallel port)

BINARY_S2

Binary (second serial port)

TEXT_S2

Text (second serial port)

You may set up multiple print queues on your UNIX host computer for the same TROY XCD print server, each with a different service name (for example, one queue for binary graphics jobs and one for text jobs). Refer to Appendix B for additional information on using services.

3.Note: This step applies to the majority of UNIX systems, including Sun OS (but not Solaris 2.xx), Silicon Graphics (lpr/lpd option required), DEC ULTRIX, DEC OSF/1, and Digital UNIX. SCO UNIX users should follow these steps, but should also refer to the SCO UNIX Configuration section in section 3-A. Users of RS/6000 AIX, HP/UX, Sun Solaris 2.xx, and other systems that do not use the printcap file should skip to section 3-A.

Configure the /etc/printcap file on each host computer to specify the local print queue, the TROY XCD print server name (also called remote machine or rm), and the TROY XCD print server service name (also called remote printer, remote queue, or rp), and the spool directory.

An example of a typical printcap file is as follows:

laser1Printer on Floor 1:\ :lp=:\

:rm=XCD_003C51:\ :rp=TEXT_P1:\ :sd=/usr/spool/lpd/laser1:

4-4 TCP/IP Network Configuration

Page 50
Image 50
TROY Group MAN-EXT2000 manual BINARYP2