-The list of unconfigured print servers will again be displayed. Click on Close to return to the main screen.
-The print server should show up on the main XAdmin32 screen (the default name will be XCD_xxxxxx, where "xxxxxx" is the last six digits of the Ethernet address). If the print server does not appear on the main screen, click on the Search button to find new print servers.
4.To configure a print server, double click on its name and enter the password (ACCESS is the default password). A series of "index cards" will be displayed. Each of these "cards" represents a protocol or other configurable item. Click on the appropriate tab to configure the item.
TROY XCD WebXAdmin
WebXAdmin allows the user to configure the print server with a standard web browser like Netscape Navigator or Microsoft Internet Explorer. It can therefore be used on any operating system that supports web browser capabilities. To use WebXAdmin, you must first make sure that you have a web browser installed on your computer and that you have configured an IP address in both the computer and the print server (refer to the previous XAdmin section if you do not know how to put an IP address in the print server). Also make sure that you have configured your TCP/IP stack to communicate over the local area network (rather than via a PPP
To use WebXAdmin, start your web browser and enter the IP address of the print server as the destination web site. Once
