Operations, SNTP Administration | MGE UPS Systems Switched PDU

3. Operations

SNTP Administration

Switched PDU supports the use of a network time service to provide a synchronized time reference.

Setting the SNTP server address

The Set SNTP command is used to set the primary and secondary SNTP server addresses.

To set the SNTP server address:

At the Switched PDU: prompt, type set sntp, followed by primary or secondary, and the SNTP server IP address. Press Enter.

Example

The following command set the primary SNTP server address to 204.152.184.72:

Switched PDU: set sntp primary 204.152.184.72<Enter>

Displaying SNTP configuration information

The Show SNTP command displays all SNTP configuration information.

To display SNTP configuration information

At the Switched PDU: prompt, type show sntp and press Enter.

Example

The following command displays the SNTP configuration information:

Switched PDU: show sntp <Enter>

SNTP Date/Time (GMT): 2003-02-21 21:32:48

SNTP Primary IP Address: 204.152.184.72

SNTP Secondary IP Address: 0.0.0.0

301-0399-4 Rev A. - Page 43

Image 43

MGE UPS Systems Switched PDU user manual Operations, SNTP Administration, Setting the SNTP server address, Example

Contents

E T N I N U E H T Switched PDU Installation and user manual Life-Support Policy InstructionsDangerous Voltage Protective Grounding Terminal OPERATIONS ContentsINSTALLATION GETTING STARTED Quick Start Guide 1. Getting Starteduser account prior to attachment to your network Standard Accessories 2. InstallationAdditional Required Items 4 Temperature / Humidity Ports Equipment OverviewFigure 1. Unit Views 1 Power Input 2 Input Current LED 3 Ethernet / RS232 Ports To install the power input retention bracket Safety PrecautionsInstalling the Power Input Retention Bracket Figure 2. Retention Bracket assembly Mounting Connecting to the Power SourceTo attach a power cord to the unit To connect to the power source Serial RS232 port Connecting DevicesConnecting the Sensors Connecting to the UnitPage C OMMAND L INE I NTERFACE 3. OperationsI NTERFACES HTML I NTERFACE Outlet Naming and Grouping Usernames and Passwords3. Operations Interfaces Figure 4. Example HTML page Logging In HTML InterfaceTo log in by HTML Outlet State/Control State Field Values Outlet ControlIndividual Group Sensors ConfigurationEnvironmental Monitoring Input Load Setting the IP address, subnet mask or gateway NetworkTelnet/SSH HTTP/SSL Setting the data-rate for the serial ports Serial PortsSetting the HTTP authentication method Setting SSL access level Changing a user password OutletsGroups Users Adding and Deleting serial port access Changing a user’s access privilege levelAdding and Deleting outlet access Adding and Deleting group access Testing the FTP upload configuration SNTPSNMP Setting the filename for upload Logging In Command Line InterfaceTools Restart Administrative Command Summary Operations Command Summary Administrative Command Summary continued To display the names of commands that you may execute Turning outlets on Operations CommandsRebooting outlets To reboot one or more outlets To display on/off status of one or more outlets Displaying outlet status To display accessible groups Displaying accessible outletsTo display accessible outlets Displaying accessible groups Displaying infeed status Displaying accessible serial portsTo display accessible serial ports Connecting to a serial device To start a new session Displaying the status of the Environmental MonitorTo display the status of the Environmental Monitor Starting a new session To create a user account Administration CommandsUser Administration Creating a user account To set the access level privilege for a user Changing a passwordTo change a password Setting user access level privileges To grant outlet access to a user Displaying the access privilege levelsTo display user access privilege levels Adding outlet access to a user To grant group access to a user Deleting outlet access for a userTo delete outlet access for a user Adding group access to a user Creating a group name Group AdministrationDisplaying user outlet, group and serial port access To display user outlet, group and serial port access Deleting an outlet from a group Outlet AdministrationAdding an outlet to a group To add an outlet to a group To display outlet information Setting the outlet wakeup stateTo set the wakeup state Displaying outlet information To enable or disable active signal checking for serial connections Serial Port AdministrationSetting the serial ports data-rate Enabling or disabling active signal checking for serial connections Creating a location description System AdministrationDisplaying system configuration information To display system configuration information To display tower information Creating a descriptive tower nameTo create a tower name Displaying tower information Setting the subnet mask TCP/IP AdministrationTo perform a warm boot Setting the IP address To enable or disable HTTP support HTTP AdministrationDisplaying network configuration information To display network configuration information To enable or disable Telnet support Telnet AdministrationFTP Administration To set the HTTP authentication method Setting the filepath for the file to be uploaded Setting the FTP PasswordTo set the FTP password Setting the filename to be uploaded To display SNTP configuration information SNTP AdministrationSetting the SNTP server address Displaying SNTP configuration information SSH Technical Specifications Enabling and Setting up SSL SupportSSL Technical Specifications Enabling and Setting up SSH Support To enable or disable SSL support SSL Command SummaryEnabling and Setting up SSL Support SSL Technical Specifications To enable or disable SSH support SSH Command SummaryEnabling and Setting up SSH Support SSH Technical Specifications To enable SNMP support SNMP Command SummaryEnabling and Setting up SNMP Support SNMP Setting the Trap community string To reset the trap destinationTo set the trap timer Setting the Get/Set community strings Infeed Status traps SNMP TrapsTrap Summary Tower Status traps Load traps Outlet Status trapsEnvironmental Monitor Status traps Temperature/Humidity Sensor Status traps Humidity Trap Temp trapsHumidity traps Temp Trap To Enable or Disable a Status trap Configuring Traps SNMP Trap Command SummaryEnabling or Disabling a Status trap To Enable or Disable the Temp trap To Enable or Disable a Load trapSetting the Infeed Load limit To Enable or Disable a Change trap To set the Temperature threshold limits Setting the Temperature sensor threshold limitsTo Enable or Disable the Humid trap Setting the Humidity sensor threshold limits WebServer1 Displaying trap configuration informationTo display trap information Status T ECHNICAL S PECIFICATIONS R ESETTING TO F ACTORY D EFAULTS5. Appendices U PLOADING F IRMWARE To reset to factory defaults using the reset button Resetting to Factory DefaultsTo reset to factory defaults from the HTML interface To reset to factory defaults from the command line Models Europe/Asia Technical SpecificationsPower Ratings Physical Specifications RS-232 port LED IndicatorsData Connections Branch Circuit ProtectionPage