3. Operations
Setting the FTP Password
The FTP Password command sets the password as required by the FTP Host.
To set the FTP password:
At the Switched PDU: prompt, type set ftp password, followed by the FTP password and press Enter.
Example
The following command sets the FTP password to OpenSesame:
Switched PDU: set ftp password OpenSesame<Enter>
Setting the filename to be uploaded
The FTP Filename command sets the filename of the firmware file to be uploaded.
To set the FTP filename:
At the Switched PDU: prompt, type set ftp filename, followed by the firmware filename and press Enter.
Example
The following command sets the FTP filename to snb_s53a.bin:
Switched PDU: set ftp filename snb_s53a.bin<Enter>
Setting the filepath for the file to be uploaded
The FTP Filepath command sets the filepath for the firmware file to be uploaded.
To set the FTP filepath:
At the Switched PDU: prompt, type set ftp filepath, followed by the filepath and press Enter.
Example
The following command sets the FTP filepath to ftp://Switched PDU:
Switched PDU: set ftp filepath ftp://Switched PDU<Enter>
Displaying FTP configuration information
The Show FTP command displays all FTP configuration information.
•FTP Host IP address
•FTP Host username and password
•Firmware filepath and filename
To display FTP configuration information:
At the Switched PDU: prompt, type show ftp and press Enter.
Example
The following command displays the FTP configuration information:
Switched PDU: show ftp<Enter>
FTP Configuration
Host IP Address: 12.34.56.99
Username: guest
Password: OpenSesame
Directory: ftp://Switched PDU
Filename: snb_s53a.bin
Page 42 -
