3. Operations
Administration Commands
Administration commands may only be issued by a user with administrative privileges, such as the predefined Admn user or another user who has been granted administrative privileges with the Set User Admnpriv command.
User Administration
Creating a user account
The Create User command creates a user account with the specified username and password. See Usernames and Passwords in this chapter for more information.
To create a user account:
At the Switched PDU: prompt, type create user, optionally followed by a
At the Password: prompt, type a password of up to 16 alphanumeric and other typeable characters (ASCII 32 to 126 decimal). Passwords are case sensitive. Press Enter. To specify no password, press Enter at the prompt.
At the Verify Password: prompt, retype the password. Press Enter. To verify no password, press Enter at the prompt.
Example
The following command creates the user account JaneDoe:
Switched PDU: create user JaneDoe<Enter>
Password: <Enter>
Verify New Password: <Enter>
For security, password characters are not displayed.
Removing a user account
The Remove User command removes a user account.
NOTE: You may remove the predefined user account Admn only if another user account has been granted administrative privileges using the Set User Admnpriv command.
To remove a user account:
At the Switched PDU: prompt, type remove user, optionally followed by a username. Press Enter.
