4. Advanced Operations
Displaying SNMP configuration information
The Show SNMP command displays all SNMP configuration information.
•SNMP support status
•SNMP community strings
•Trap timer value
•Trap destinations
To display SNMP configuration information:
At the Switched PDU: prompt, type show snmp and press Enter.
Example
The following command displays the SNMP configuration information:
Switched PDU: show snmp<Enter> |
|
SNMP Configuration |
|
SNMP: | Enabled |
SET Community String: | private |
GET Community String: | public |
TRAP Community String: | trap |
Error Trap Repeat Time (seconds): 180 | |
Trap Destination 1: | 64.42.31.208 |
Trap Destination 2: | (undefined) |
SNMP Traps
The Switched PDU supports three types of SNMP traps. Traps are enabled at the tower (T), infeed (I) or outlet
(O) level.
Trap Summary
Name | Level(s) | Description |
Status | T, I, O | Operational status change |
|
|
|
Change | O | Control status change |
|
|
|
Load | I | Input load out of limit |
All traps include the Location of the Switched PDU as defined with the Set Location command. See Creating a location description on page 37 for more information.
Status trap
A Status trap is generated when an error condition occurs on a tower, infeed or outlet. Status traps include the reported Status, the Location of the Switched PDU, and identifier and name of the affected tower, infeed or outlet.
Any Trap Status generates a Status trap and triggers the trap timer. A new trap is generated at the end of every timer period until the Status returns to a
Tower Status traps
Status | Error | Description |
Normal |
| Tower is working correctly |
|
|
|
NoComm | x | Communication to the tower has been lost |
Infeed Status traps
Status | Error | Description |
On |
| Infeed is on |
|
|
|
OffError | x | Infeed should be on but no current is sensed at the infeed |
|
|
|
NoComm | x | Communication to the infeed has been lost |
|
|
