Operations, Example | MGE UPS Systems Switched PDU specs

3. Operations

Displaying the status of the Environmental Monitor

The Envmon command displays the status of the integrated Environmental Monitor.

By default, only administrative user accounts are allowed access to the Envmon command. An administrator may user the Set User Envmon command to enable and disable access for other user accounts.

To display the status of the Environmental Monitor:

At the Switched PDU: prompt, type envmon and press Enter.

Example

The following command displays the status of the Environmental Monitor.

Switched PDU: envmon<Enter>
Environmental Monitor .A		Status: Normal
Name: Florida_HQ_1		Status: Normal
Temperature/Humidity Sensors
ID	Name	Temperature	Humidity
.A1	Temp_Humid_Sensor_A1	Not Found	Not Found
.A2	T/H2_Florida_HQ_1	23.5 Deg. C	22 % RH

Starting a new session

The Login command activates the Username: prompt. The current session ends, allowing a user to log in and start a new session under a different username.

To start a new session:

At the Switched PDU: prompt, type login and press Enter. The Username: prompt appears.

Ending a session

The Quit or Logout commands ends a session. A session ends automatically when no activity is detected for five minutes, or upon loss of connection.

To end a session:

At the Switched PDU: prompt, type quit and press Enter, or

Type logout and press Enter.

Page 28 - 301-0399-4 Rev A.

Image 28

MGE UPS Systems Switched PDU Operations, Displaying the status of the Environmental Monitor, Example, Ending a session

Contents

Switched PDU Installation and user manual E T N I N U E H T Instructions Dangerous VoltageProtective Grounding Terminal Life-Support Policy Contents INSTALLATIONGETTING STARTED OPERATIONS Quick Start Guide 1. Getting Starteduser account prior to attachment to your network Standard Accessories 2. InstallationAdditional Required Items Equipment Overview Figure 1. Unit Views1 Power Input 2 Input Current LED 3 Ethernet / RS232 Ports 4 Temperature / Humidity Ports Safety Precautions Installing the Power Input Retention BracketFigure 2. Retention Bracket assembly To install the power input retention bracket Connecting to the Power Source To attach a power cord to the unitTo connect to the power source Mounting Connecting Devices Connecting the SensorsConnecting to the Unit Serial RS232 portPage 3. Operations I NTERFACESHTML I NTERFACE C OMMAND L INE I NTERFACE Usernames and Passwords 3. OperationsInterfaces Outlet Naming and Grouping Figure 4. Example HTML page Logging In HTML InterfaceTo log in by HTML Outlet Control IndividualGroup Outlet State/Control State Field Values Configuration Environmental MonitoringInput Load Sensors Network Telnet/SSHHTTP/SSL Setting the IP address, subnet mask or gateway Serial Ports Setting the HTTP authentication methodSetting SSL access level Setting the data-rate for the serial ports Outlets GroupsUsers Changing a user password Changing a user’s access privilege level Adding and Deleting outlet accessAdding and Deleting group access Adding and Deleting serial port access SNTP SNMPSetting the filename for upload Testing the FTP upload configuration Command Line Interface ToolsRestart Logging In Operations Command Summary Administrative Command Summary To display the names of commands that you may execute Administrative Command Summary continued Operations Commands Rebooting outletsTo reboot one or more outlets Turning outlets on Displaying outlet status To display on/off status of one or more outlets Displaying accessible outlets To display accessible outletsDisplaying accessible groups To display accessible groups Displaying accessible serial ports To display accessible serial portsConnecting to a serial device Displaying infeed status Displaying the status of the Environmental Monitor To display the status of the Environmental MonitorStarting a new session To start a new session Administration Commands User AdministrationCreating a user account To create a user account Changing a password To change a passwordSetting user access level privileges To set the access level privilege for a user Displaying the access privilege levels To display user access privilege levelsAdding outlet access to a user To grant outlet access to a user Deleting outlet access for a user To delete outlet access for a userAdding group access to a user To grant group access to a user Group Administration Displaying user outlet, group and serial port accessTo display user outlet, group and serial port access Creating a group name Outlet Administration Adding an outlet to a groupTo add an outlet to a group Deleting an outlet from a group Setting the outlet wakeup state To set the wakeup stateDisplaying outlet information To display outlet information Serial Port Administration Setting the serial ports data-rateEnabling or disabling active signal checking for serial connections To enable or disable active signal checking for serial connections System Administration Displaying system configuration informationTo display system configuration information Creating a location description Creating a descriptive tower name To create a tower nameDisplaying tower information To display tower information TCP/IP Administration To perform a warm bootSetting the IP address Setting the subnet mask HTTP Administration Displaying network configuration informationTo display network configuration information To enable or disable HTTP support Telnet Administration FTP AdministrationTo set the HTTP authentication method To enable or disable Telnet support Setting the FTP Password To set the FTP passwordSetting the filename to be uploaded Setting the filepath for the file to be uploaded SNTP Administration Setting the SNTP server addressDisplaying SNTP configuration information To display SNTP configuration information Enabling and Setting up SSL Support SSL Technical SpecificationsEnabling and Setting up SSH Support SSH Technical Specifications SSL Command Summary Enabling and Setting up SSL SupportSSL Technical Specifications To enable or disable SSL support SSH Command Summary Enabling and Setting up SSH SupportSSH Technical Specifications To enable or disable SSH support SNMP Command Summary Enabling and Setting up SNMP SupportSNMP To enable SNMP support To reset the trap destination To set the trap timerSetting the Get/Set community strings Setting the Trap community string SNMP Traps Trap SummaryTower Status traps Infeed Status traps Outlet Status traps Environmental Monitor Status trapsTemperature/Humidity Sensor Status traps Load traps Temp traps Humidity trapsTemp Trap Humidity Trap To Enable or Disable a Status trap Configuring Traps SNMP Trap Command SummaryEnabling or Disabling a Status trap To Enable or Disable a Load trap Setting the Infeed Load limitTo Enable or Disable a Change trap To Enable or Disable the Temp trap Setting the Temperature sensor threshold limits To Enable or Disable the Humid trapSetting the Humidity sensor threshold limits To set the Temperature threshold limits Displaying trap configuration information To display trap informationStatus WebServer1 R ESETTING TO F ACTORY D EFAULTS 5. AppendicesU PLOADING F IRMWARE T ECHNICAL S PECIFICATIONS Resetting to Factory Defaults To reset to factory defaults from the HTML interfaceTo reset to factory defaults from the command line To reset to factory defaults using the reset button Technical Specifications Power RatingsPhysical Specifications Models Europe/Asia LED Indicators Data ConnectionsBranch Circuit Protection RS-232 portPage