Lucent Technologies 1079984G3 Administration, Change system-parameters guestworks-bcs-options

Feature Descriptions

Administration

In addition to the following, see the information about administering Recorded Announcement equipment on Page 109 and printing reports on Page 113.

change system-parameters guestworks-bcs-options

■Enter a y in the Dual Wakeup and Room Activated Wakeup with Tones fields. These options default to y, and can be changed only by Lucent Technologies personnel.

NOTE:

If Wakeup Activation via Tones is enabled, the speech synthe- sizer circuit pack (TN725B) is disabled from service. This means that guests cannot enter their own Do Not Disturb requests.

change feature-access-codes

■Use this form to add the Automatic Wakeup feature access code.

change system-parameters hospitality

■On Page 2 of this form, enter the time of day when you want to print the wakeup activity report in the Time of Scheduled Wakeup Activity Report field. This report is printed on the Journal/Schedule printer and summarizes the wakeup activity for each extension that had wakeup activity for the past 24 hours.

■On Page 2 of this form, enter the time of day when you want to print the wakeup summary report in the Time of Scheduled Wakeup Sum- mary Report field. This report is printed on the Journal/Schedule printer and gives an hour-by-hour summary of the number of scheduled wakeup calls and a list of extensions to which wakeup calls were attempted but did not complete during the hour.

Issue 1 April 1997 29