Voice Messaging

Administration

The administration shown here is for the Lucent INTUITY Lodging product but will also be used for other voice messaging systems. A group of extension num- bers must be reserved as voice messaging ports. These numbers cannot be used for anything else.

! SECURITY ALERT:

Always restrict the voice port COR to Outward Restriction and use an FRL of 0 to prevent unauthorized calls from being made using the voice messaging system.

add station XXXX (XXXX is the first voice port used in the voice messaging hunt group)

Use this form to add the first voice messaging port. Administer the port as a model 2500 telephone to a port on the TN791 circuit pack. Enter AUDIX 1 in the Name field, and enter y in the Switchhook Flash and

Adjunct Supervision field.

duplicate station XXXX (XXXX is the first voice port used in the voice messaging hunt group)

Use this form to add the rest of the voice messaging ports. After you issue the command, a duplicate of the first voice port displays, and you need to change the values in the Extension and Name fields. For exam- ple, your voice port extensions could be 501, 502, 503, and so on; exten- sion 501 is named AUDIX 1, 502 is named AUDIX 2, and so on.

98Issue 1 April 1997

Page 104
Image 104
Lucent Technologies 1079984G3 manual Adjunct Supervision field