1.Make sure attachment clutch and ignition switches are in "OFF" position.

2.Adjust the three nylon Iocknutsuntil space between clutch plate and rotor measures .012" at all three slot

locations cut in the side of brake plate. NOTE: After installing a new electric clutch, run tractor at full throttle and engage and disengage electric clutch 10 cycles to wear in clutch plate.

k_ rjRotor

c,utchP, te

Slot (3)

INylon Locknut"

Plate

TO ADJUST BRAKE

Your tractor is equipped with an adjustable brake system which is mounted on the side of the transaxle.

If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted.

1.Depress clutch/brake pedal and engage parking brake.

2.Measure distance between brake

operating arm and nut "A" on brake rod.

3.If distance is other than 1-1/2", loosen jam nut and turn nut "A" until distance becomes 1-1/2". Retighten jam nut against nut "A".

4.Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than six (6) feet in highest gear, further maintenance is neces- sary. Contact your nearest autho- rized service center/department.

With Parking Brake "Engaged"

Nut "A"

Nut

Operating

TO REPLACE MOTION DRIVE BELT Park the tractor on level surface. Engage parking brake. For ease of service there is a belt installation guide decal on bottom of left footrest.

1.Remove mower (See "TO REMOVE MOWER" in this section of this

manual.)

BELT REMOVAL-

2.Engage parking brake (creates slack in belt).

3.Remove belt from clutching and fan idler pulleys.

4.Loosen belt keeper above transaxle pulley.

5.Remove belt from transaxle pulley.

6.Remove belt from engine pulley and front V-idler pulley.

7.Pull belt out of all belt keepers and remove from tractor.

BELT INSTALLATION -

1.Place V part of belt into grooves on engine pulley and front V-idler, making sure to route belt inside of all belt keepers.

2.Route belt on right side, coming from V-idler, towards back of tractor, above midspan belt keeper and to top of transaxle pulley.

3.Route belt on left side, coming from engine pulley, towards back of tractor and through loop in midspan belt keeper,

4.Place V part of belt into grooves on transaxle and fan idler pulleys, making sure to route belt inside of all belt keepers.

5.Retighten belt keeper above transaxle pulley.

Tractor V-BeltDrive Schematic

Viewed From LH. Side of Tractor

Transaxle Pulley

Belt Kee

Clutching

Engine Clutching Flat Idler

Pu"_YAbove Belt Keeper

V-Idler

Belt Keepers Belt Twists

Belt Keeper Fan Idler

Engine Pulley

V-Idler

As Viewed From Bottom

27

Page 27
Image 27
Craftsman 917.273062 owner manual To Adjust Brake, Belt Removal, Belt Installation

917.273062 specifications

The Craftsman 917.273062 is a high-performance riding lawn mower designed for residential and light commercial use, blending efficiency, power, and ease of operation. This robust machine is ideal for users seeking to maintain larger lawns or properties with varying terrains.

One of the standout features of the Craftsman 917.273062 is its powerful engine. Equipped with a 19.5 horsepower Briggs & Stratton engine, this mower delivers reliable performance, offering ample power to handle thick grass and uneven surfaces. The engine's design ensures smooth operation with reduced noise levels, making mowing more pleasant.

The mower features a 42-inch cutting deck, allowing it to cover vast areas in a single pass. This deck design incorporates a twin-blade system, which enhances cutting efficiency and provides a clean, even cut. The adjustable cutting heights, ranging from 1.5 inches to 4 inches, allow users to customize their mowing experience based on their lawn's specific needs.

For improved maneuverability, the Craftsman 917.273062 features a tight turning radius, enabling users to navigate around obstacles such as trees, flower beds, and garden fixtures with ease. This is particularly advantageous for homeowners with intricate landscapes. The riding mower is also designed with a comfortable, high-back seat, which is ergonomically shaped to provide support and reduce fatigue during prolonged use.

Technologically, the mower includes a user-friendly dashboard that displays essential information, such as fuel level, speed settings, and maintenance reminders. This intuitive interface simplifies operation and helps users manage their mowing tasks effectively.

Another characteristic of the Craftsman 917.273062 is its ease of maintenance. The mower features an accessible cutting deck that makes it simple to clean and maintain the blades, ensuring optimal performance over time. Additionally, the mower is equipped with a fuel-efficient system, reducing the frequency of refueling and minimizing environmental impact.

In summary, the Craftsman 917.273062 combines power, efficiency, and user-friendly design to provide a superior mowing experience. Its combination of a robust engine, versatile cutting deck, ergonomic design, and ease of maintenance makes it a preferred choice for homeowners and landscape enthusiasts alike. Whether for routine lawn care or tackling overgrown areas, the Craftsman 917.273062 proves to be a reliable and effective solution.