Manuals / Craftsman / Lawn and Garden / Lawn Mower

Craftsman 917.273062 owner manual To Adjust Gauge Wheels, To Operate Mower, To Operate on Hills

Models: 917.273062

1 68
Download 68 pages 13.65 Kb
Page 16
Image 16

The cutting height range is approximately 1-1/2" to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

*The average lawn should be cut to approximately 2-1/2 inches during the cool season and to over 3 inches

during hot months. For healthier and better looking lawns, mow often and

after moderate growth.

=For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut

relatively high; the second to desired height.

TO ADJUST GAUGE WHEELS

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper

position to help prevent scalping in most terrain conditions.

NOTE: Adjust gauge wheels with tractor on a flat level surface.

1.Adjust mower to desired cutting height.

2.Lower mower with lift control. Re- move rear retainer spring and clevis pin which secure each gauge wheel.

3.Lower gauge wheels to ground. Raise gauge wheels slightly to align holes in bracket and gauge wheel bar and insert clevis pins. Gauge wheels should be slightly off the ground.

4.Replace retainer springs into clevis pins.

Retainer Clevis Pin

Gauge

Wheel

Bar

Gaug___

Wheel

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.

1.Select desired height of cut.

2.Lower mower with attachment lift control.

3.Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

_CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield in place.

Attachment Clutch

Attachemnt Lift

Switch Pull Out to

Lever High

"Engage"

Position

 

 

,C'

 

 

Low

 

":"

Position

to

"Disengage"

Deflector

Shield

TO OPERATE ON HILLS

_CAUTION: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

*Choose the slowest speed before starting up or down hills.

,Avoid stopping or changing speed on hills.

=If slowing is necessary, move throttle control lever to slower position.

,If stopping is absolutely necessary, push clutch/brake pedal quickly to

brake position and engage parking brake.

= Move motion control lever to slowest

setting.

IMPORTRANT: The motion control lever does not return to neutral (N) position when the clutch/brake pedal is de- pressed.

°To restart movement, slowly release parking brake and clutch/brake pedal.

*Slowly move motin control lever to slowest setting.

, Make all turns slowly.

16

Page 15 Page 17
Page 16
Image 16
Craftsman 917.273062 owner manual To Adjust Gauge Wheels, To Operate Mower, To Operate on Hills
Page 15 Page 17

917.273062 specifications

The Craftsman 917.273062 is a high-performance riding lawn mower designed for residential and light commercial use, blending efficiency, power, and ease of operation. This robust machine is ideal for users seeking to maintain larger lawns or properties with varying terrains.

One of the standout features of the Craftsman 917.273062 is its powerful engine. Equipped with a 19.5 horsepower Briggs & Stratton engine, this mower delivers reliable performance, offering ample power to handle thick grass and uneven surfaces. The engine's design ensures smooth operation with reduced noise levels, making mowing more pleasant.

The mower features a 42-inch cutting deck, allowing it to cover vast areas in a single pass. This deck design incorporates a twin-blade system, which enhances cutting efficiency and provides a clean, even cut. The adjustable cutting heights, ranging from 1.5 inches to 4 inches, allow users to customize their mowing experience based on their lawn's specific needs.

For improved maneuverability, the Craftsman 917.273062 features a tight turning radius, enabling users to navigate around obstacles such as trees, flower beds, and garden fixtures with ease. This is particularly advantageous for homeowners with intricate landscapes. The riding mower is also designed with a comfortable, high-back seat, which is ergonomically shaped to provide support and reduce fatigue during prolonged use.

Technologically, the mower includes a user-friendly dashboard that displays essential information, such as fuel level, speed settings, and maintenance reminders. This intuitive interface simplifies operation and helps users manage their mowing tasks effectively.

Another characteristic of the Craftsman 917.273062 is its ease of maintenance. The mower features an accessible cutting deck that makes it simple to clean and maintain the blades, ensuring optimal performance over time. Additionally, the mower is equipped with a fuel-efficient system, reducing the frequency of refueling and minimizing environmental impact.

In summary, the Craftsman 917.273062 combines power, efficiency, and user-friendly design to provide a superior mowing experience. Its combination of a robust engine, versatile cutting deck, ergonomic design, and ease of maintenance makes it a preferred choice for homeowners and landscape enthusiasts alike. Whether for routine lawn care or tackling overgrown areas, the Craftsman 917.273062 proves to be a reliable and effective solution.