Lucent Technologies 1079984G3 manual On Page 2 of this form, add the following feature buttons

Automatic Wakeup

■On Page 2 of this form, enter an extension number in the Extension to Receive Failed Wakeup LWC Messages field. This defines which extension will receive LWC messages that represent failed wakeup attempts. Assign an extension number that is in the dial plan but is not currently assigned to another object. Administer an automatic message waiting lamp appearance for this extension at the attendant console and on the backup voice terminals. Use the button labeled Failed Wakeup .

■On Page 2 of this form, enter an extension number in the Routing Extension on Unavailable Voice Synthesis field. This defines where you want to route callers when the speech synthesizer circuit pack is unavailable for Automatic Wakeup and Do No Disturb requests. For most cases, the attendant console extension number (or the value attd) is used.

change attendant 1

■On Page 2 of this form, add the following feature buttons:

—auto-wkup

—aut-msg-wt(this is the extension used for failed wakeup mes- sages; the button is labeled Failed Wakeup )

change station XXXX (XXXX is the extension number of the backup voice terminal)

■Add the following features to the backup voice terminal feature buttons:

—auto-wkup

—aut-msg-wt(this is the extension used for failed wakeup mes- sages; the button is labeled Failed Wakeup )

30Issue 1 April 1997