Lucent Technologies 1079984G3 manual Administration, Mwn-act Mwn-deact

Feature Descriptions

Administration

change system-parameters hospitality

■On Page 1 of this form, enter an assignment in the Message Waiting Configuration field. If you do not have a PMS, or the message waiting notifications are not controlled by the PMS, put act-nopmsin this field. If the message waiting notifications are controlled by the PMS, put act-pmsin this field. The PMS vendor should be consulted concerning this setting.

change attendant 1

■On Page 2 of this form, add the following feature buttons:

—mwn-act

—mwn-deact

change station XXXX (XXXX is the extension number of a backup voice termi- nal)

■Add the following feature buttons:

—mwn-act

—mwn-deact

change station XXXX (XXXX is the extension number of a visually impaired guest)

■On Page 1 of this form, enter y in the Audible Message Waiting field.

Required Hardware

There is no special hardware required for this feature.

Issue 1 April 1997 67