2.If you are configuring an NDS queue, enter the commands:
SET SERVICE servicename TREE treename
SET SERVICE servicename CONTEXT contextname
where servicename is the service that you want to configure (the default service names are listed in the Default Print Server Names section at the beginning of this chapter), treename is the name of your NDS tree, and contextname is the NDS context where the print server will reside. Now skip to step 3.
If you are configuring a bindery queue, enter the command:
SET NETW QSERVER fileserver ON servicename
where fileserver is the name of the file server where the queue will reside (note that this is not necessarily the same as the volume name), and servicename is the name of the print server service (the default service names are listed in the Default Print Server Names section at the beginning of this chapter).
Note: The SET NETWARE SERVER command, which enables file servers on a global basis, is available for compatibility with older firmware releases, but is not recommended for new applications.
3.Start PCONSOLE
-If necessary, change to the desired context if you are using NDS.
