TROY Group MAN-EXT2000 manual DECprint Supervisor Configuration Notes

CREATE PORT LTA53:/APPLICATION

SET PORT LTA53:/NODE=XCD_009C53/PORT=P1

Do not set the LAT port as a spooled device. Now go into ADMIN/MSA and enter the command :

ADD PRINTER name/QUEUE=queuename/DEST=LTA53:

where name is the name of the printer, and queuename is the queue name.

DECprint Supervisor Configuration Notes

If you want to use a TROY XCD print server with the DECprint Supervisor software, you must have the DCPS- Open option in order to support Hewlett-Packard printers (you may also need to modify the DCPS device control modules and queue setup to handle "unrecognized" printers). Do not use the print server console command SET SERVICE RECEIVE, because bidirectional communications is required for DCPS.

Important: DCPS requires that the printer be forced into PostScript mode. It will NOT work if the printer is set to autosense between PCL and PostScript.

Important: If you are using the parallel port on the printer, the port must be compatible with the IEEE P1284 bitronics bidirectional standard.

Installation on Other Host Computers

Installation procedures differ somewhat for other DEC

11-10 LAT Network Configuration