TROY Group MAN-EXT2000 manual Push Escape and select Queues Serviced by Printer

e.Push ESCAPE and save the changes.

f.Push ESCAPE and select Queues Serviced by

Printer.

g.Highlight the printer name that you just configured and press ENTER.

h.Press INSERT, choose the desired print queue, and press ENTER (you can accept the default priority).

i.Press ESCAPE several times to exit PCONSOLE.

5.Insert the TROY XCD Print Server Software diskette or CD-ROM into your PC and run the XCONFIG utility (in the \utilities directory on the CD-ROM)

Select the TROY XCD print server from the list of print servers. When you get the message that the print server is connected, press the ENTER key and type the password ACCESS in response to the "#" prompt (the password will not echo), and then press the ENTER key again in response to the Enter Username> prompt. When you get the Local> prompt, type:

SET NET NPRINTER nlm number ON service

SET NET RESCAN

EXIT

where nlm is the name of the PSERVER NLM on your file server, number is the printer number (must match the printer number you selected during the PCONSOLE configuration in the previous steps) and service is the name of the service (the default service names are listed in the Default Print Server Names section of this chapter).

Novell Network Configuration 5-25