higher performance. Some TROY XCD print server models also support printing using the NetBEUI or DLC/LLC protocols (refer to Chapter 1 for specific protocol support information). Windows NT and OS/2 configuration using these protocols is described in Chapters 9 and 10 of this manual.
Windows NT IP Configuration
To configure a print queue from a Windows NT computer, you must first configure an IP address in both the computer and in the print server as follows:
1.If you have not already done so, install TCP/IP on your Windows NT system. This is done via the Network icon in the Control Panel window of the Windows NT system (the Control Panel is in the Main window on NT V3.5x systems, or use the Start button on NT V4.xx to access the Settings menu).
a.On NT V3.5x systems, select Add Software and add TCP/IP Protocol and related components. Click on Continue and choose the options TCP/IP Network Printing Support and Connectivity Options, and click on Continue again. Insert the requested disk(s) to copy the required files.
b.On NT V4.xx systems, click on the Protocols tab, select Add, and double click on TCP/IP protocol. Insert the requested disk(s) to copy the required files. Then click on the Services tab and double click on Microsoft TCP/IP Printing. Again insert the requested disk(s). Click on the Protocols tab when then copying is finished.
