server. Usually this will be the first part of the
7.Enter the password for the mailbox, if any.
8.The print server is configured by default to poll the POP3 server every 30 seconds. You may change this value, if desired.
9.If you have enabled notification, enter the IP address of your SMTP server (consult your network administrator if you do not know this address).
10.Press the OK button., and exit XAdmin or XAdmin32. You have now configured the print server to receive print jobs. Skip to the Printing to the Remote TROY Print Server section later in this manual.
Using the Console to Configure the Print Server
NOTE: Skip this section if you used XAdmin, Admin32, or WebXAdmin to configure the remote TROY XCD print server.
As an alternative to the TROY XCD graphical configuration utilities, you can use the print server console to configure the remote TROY XCD print server. The console can be accessed via the print server serial port, TELNET, DEC NCP, or the TROY XCD XCONFIG utility. Refer to Appendix A if you do not know how to use the console.
