You may delete this print service by typing LATCP at the C:> prompt and then entering the command
DELETE LPT1:
b.If you are using WINDOWS, first make sure that you have selected DEC PATHWORKS as the network under the Windows Setup icon. Then:
-Click on the Print Manager icon and select Options and then Printer Setup
-Click Add, go to the List of Printers, select the desired printer type, and click Install. If desired, click Set as Default Printer.
-Click Connect and select the desired port (e.g., LPT1)
-Click Network and select the port you chose above and type in the network path (\\node\service, where node is the DECnet node name and service is the service name picked previously; for example, \\VAX\LASER)
-Click Connect (the Current Printer Connection should show the port and the network path that you selected)
-Click Close, OK, Close, and Exit to get out of the Print Manager
PATHWORKS for Macintosh Configuration
If you are using PATHWORKS for Macintosh, you will need to make sure that you have a bidirectional channel (in other words, you did NOT enter the command SET SERVICE servicename RECEIVE ENABLED from the TROY XCD print server remote console). Then create a LAT port using LATCP as shown in the following example (substitute your actual node name and LAT port number):