TROY Group MAN-EXT2000 manual LAT Network Configuration

of the Ethernet address (for example,

XCD_00C3E4). You can get the name of your print server by running the TROY XCD print server self- test (refer to Chapter 2 for information on running the self-test), or with the SHOW SERVER command from the TROY XCD print server console. The port name is P1 for the first parallel port. If you have an XConnect II or XConnect 100, the names of the additional ports are as follows:

XConnect II serial port	S1
XConnect II parallel port with LN03 option	LN
XConnect 100 first serial port	S1
XConnect 100 second parallel port	P2
XConnect 100 second serial port	S2

Please note that the name of the XConnect 100 parallel port is P1, even if the LN03 option is installed.

Important: If you wish to use a different node name, you must change the print server name as described in as described in Appendix A.

2.Use the VMS editor to create a text file with the necessary configuration commands (alternatively, you may edit the file LAT$SYSTARTUP.COM for VMS

5.5-x and later systems or LTLOAD.COM for earlier VMS systems). For instance, the following sample command file creates a queue named XCD on LAT port 33 for a TROY print server with a default node name of XCD_00C351 using the LATSYM processor and the default VMS form:

LAT Network Configuration 11-3