5.Associate the printer with the print queue:
-Change context if required and then double click on the name of the printer you created in step 3.
-Click on Assignments and then Add...
-Change context if necessary and select the print queue you created in step 4. Click OK and then OK again
6.Associate the print server with the printer:
-Change context if required and then double click on the name of the print server you created in step 5.
-Click on Assignments and then Add...
-Change context if necessary and select the printer you created in step 3. Click OK and then OK again.
7.Exit NWAdmin. You are now ready to use the print queue from a NetWare workstation.
Configuring the Print Server and Print Queue Using PCONSOLE and XCONFIG (Queue Server Mode)
As an alternative to JetAdmin and XAdmin, you can use the standard Novell PCONSOLE utility in conjunction with TROY XCD's XCONFIG program to set up your print queues (note that if desired, you may use TELNET, the DEC NCP utility, or the serial port instead of XCONFIG). The procedure is basically as follows:
1.Use XCONFIG to connect to the print server. Enter the password (ACCESS is the default) and type anything in response to the Enter Username> prompt.
