command to extract the software. Accept the default directory to store the files. Follow the instructions in the README files to install the software.
3.Run JetAdmin by typing jetadmin at the UNIX prompt (on SunOS 4.xx systems, you use the hpnpcfg program instead of JetAdmin, but the configuration steps are similar).
4.Select item 1 (Configuration) and then select item 3 (Add printer to local spooler).
5.Enter the desired name for the TROY XCD print server or IP address at the Enter the network printer name/IP Name prompt.
Note: With versions of firmware earlier than 3.46, you must enter the name (do not enter the IP address) before configuring the print server name in the / etc/hosts file, or in NIS or DNS. You will get a message Unknown printer. Do you wish to continue?". Enter "Y" to continue.
6.Select the printer type (for example, “HP LaserJet IIISi Printers”).
7.If desired, change any of the configurable parameters (note that the default queue name is the name of the printer plus an “_” and a number (e.g., laser_1)). Then enter 0 to configure the queue.
8.Answer “Y” at the “OK to Continue?” prompt. Exit the JetAdmin utility by pressing RETURN and then “q” twice.
