where ipaddr is the IP address of the TROY XCD print server, file is the name of the load file, and password is the print server password (ACCESS is the default password).
To download the file from most UNIX systems, enter the following commands from the UNIX system prompt:
tftp ipaddress tftp> binary
tftp> put file password
where ipaddress is the IP address of the TROY XCD print server, file is the name of the load file, and password is the print server password (ACCESS is the default password).
Downloading from a UNIX Host Computer using Slave Mode tftp
To download the print server firmware from a UNIX host using slave mode tftp, first copy the file XJET.BIN to that host. Make sure that tftp is started by checking the appropriate files on your system (generally speaking, tftp must be enabled in your /etc/services file and possibly in another configuration file, such as /etc/ inetd.conf). Refer to your UNIX system documentation or man pages for additional information.
Now log into the print server remote console using TELNET or the serial port (see Appendix A if you do not know how to do this), and execute the following commands:
SET LOAD IP
SET LOAD SOFTWARE "pathname"
SET LOAD ENABLE
