Process Software's TCPware simply uses the VMS INIT/QUEU command with their special symbiont in the following format:
INIT/QUEUE/PROC=TCPWARE_TSSSYM/ON="host,port" queue
where host is the IP address or name of the TROY XCD print server, port is the TROY XCD print server raw TCP port number (9100 for the parallel port, 9101 for the serial port, 9102 for the XConnect 100 second parallel port, or 9103 for the XConnect 100 second serial port), and queue is the VMS queue name.
TGV's Multinet requires you to run the MULTINET command, then use the ADD
command to add a printer, specifying the TROY XCD print server IP address, a protocol type of LPD, and one of the service options described at the beginning of this section as the remote print queue.
With Wollongong's PATHWAY, first make sure that you have the Access option with lpd enabled. Then enter the print server name and IP address in the
TWG$TCP:[NETDIST.ETC]HOSTS. file, run the LPGEN program, and execute the command add queue/
where queue
is the name of the queue, xcdname is the TROY XCD print server name from the hosts file, and service is the TROY XCD print server service name.
To use a TROY XCD print server with an IBM AS/400 running IBM’s TCP/IP Gateway Services for OS/400 (the OS/400 system must be v3.1 or later):
