you must use a different name). In any case, the node name in the /etc/hosts file must match the node name in the /etc/printcap file.
Note: Some systems, such as HP/UX and AIX allow you to enter the IP address as the host name when setting up the print queue. If this is the case, you do not need to configure the hosts file.
2.Choose which TROY XCD print server service you want to use. There are two types of services available on the TROY XCD print server. Binary services pass data through unmodified and are therefore required for PCL or PostScript rasterized graphics printouts. Text services add a carriage return at the end of each line for proper formatting of UNIX text files (which end in linefeed and do not have carriage returns). The text service can also be used for
If you are using the first parallel port on the print server, choose one of the available services (this service name will be used in step 3):
BINARY_P1 | Binary (parallel port) |
TEXT_P1 | Text (parallel port) |
The XConnect II and Pony 100 also support the following services:
BINARY_S1 | Binary (serial port) |
TEXT_S1 | Text (serial port) |
The XConnect 100 supports the following additional services:
