-Select Printers.
-Select Configure.
-Select Add.
-Enter the name of the print queue you entered in the /etc/printcap file as the Printer name,
-Enter anything as the Comment, and Class name.
-For the Use printer interface select "Existing".
-Press the F3 key to get a list of available interfaces, and select the desired one as the Name of interface using the arrow keys and Enter key ("Dumb” is a good choice).
-Select "Direct" as the Connection.
-Enter the desired Device name (/dev/lp generally works).
-Select "Hardwired" as the Device.
-Select "No" for the Require banner field.
Other Non-Standard Configurations
With DEC TCP/IP Services for VMS (UCX), you first need to put a name for the TROY XCD print server in the HOSTS file using the command SET HOST name /ADDRESS=ipaddress at the UCX> prompt, where name is the desired name for the print server and ipaddress is the IP address for the print server. Then use the sys$system:ucx$lprsetup command to add a printer (print queue). Enter the desired printer name, and then use the TROY XCD print server name as the remote system name. Specify one of the TROY XCD print server services (see beginning of this section for options) as the remote system printer name (accept the defaults for other questions).
