To install XAdmin32 or XAdmin, insert the appropriate diskette or CD-ROM in the computer, select Run from the Windows menu, select Browse, choose the appropriate drive (these programs are in the Utilities folder if you are using a CD-ROM), and double click on Setup.exe and then click OK.

Note: XAdmin32 and other TROY XCD utilities are available on the TROY XCD web site (http:// www.troyxcd.com) if you did not receive them on disk.

1.Follow the instructions on the screen to complete the installation.

2.Double click on the XAdmin icon or use the Windows 95/NT 4.x Start button to select XAdmin in the XCD folder in the list of Programs.

3.A list of configured print servers will appear. If you are running XAdmin or if you are running NetWare with XAdmin32, skip to step 4. If you are running TCP/IP, then you must enter an IP address into the print server as follows (refer to Chapters 4 or 7 for alternate methods for configuring the IP address):

-Make sure that your computer is configured for TCP/IP with a valid IP address configured for LAN operation (not PPP dial-up; refer to your system documentation for additional information).

Important Note: Consult your system manager before assigning IP addresses to your computer or to the print server in order to avoid duplications. If your network does not have an officially assigned

3-2 Management Methods

Page 37 Page 39
Page 38
Image 38
TROY Group MAN-EXT2000 manual Management Methods
Page 37 Page 39
Top Page Image Contents