Korg Speaker System owner manual Installing the Korg MIDI Driver into a Macintosh, Appendices

4When you finish making settings, click the [OK] button. Alternatively, if you wish to cancel the changes you made, click [Cancel]. If you have made changes, you must restart Windows.

Installing the Korg MIDI Driver

into a Macintosh

You can use the Korg MIDI Driver if the MIDI applica- tion (sequencer) you use runs on Apple MIDI Manager.

If you are using a MIDI application that does not use Apple MIDI Manager, it is not necessary to install the Korg MIDI Driver. Set the MIDI output port of your MIDI application to the port to which the TRITON is connected, and set the Clock setting to [1 MHz].

In order to use the Korg MIDI Driver, the Apple MIDI Manager and PatchBay must already be installed. Use the versions of Apple MIDI Manager and PatchBay that are included with your MIDI application. They are not included with the AG- 002B.

When the Korg MIDI Driver is used, the “Modem MIDI Out/Port setting” dialog box will allow you to specify the MIDI channels and types of mes- sages which will be transmitted to the TRITON. If you do not need this functionality, you can simply use the Apple MIDI Driver without the Korg MIDI Driver. When using the Apple MIDI Driver (☞p.132).

1Copy the KORG MIDI Driver from the disk included with the AG-002B into the system folder of your startup disk.

2If there is a copy of Apple MIDI Driver in your sys- tem folder, either delete it, or move it to another folder. Be careful not to delete or move the Apple MIDI Manager.

The KORG MIDI Driver includes the functionality of the Apple MIDI Driver.

3From the Special menu, select “Restart.”

Setting up the Korg MIDI Driver (Mac- intosh)

1Start up PatchBay.

Time Port MIDI In Port MIDI Out Port

Connected Port

Modem Port

Printer Port

If installation has been performed correctly, the KORG MIDI Driver icon shown above will appear in the PatchBay window when PatchBay is started up. (The modem and printer ports will be displayed differently depending on the setup condition.)

2In PatchBay, double-click the KORG MIDI Driver icon.

The setup dialog box will appear.

3Check the Port Enable box for the port to which the TRITON is connected, and specify [1 MHz].

Since the TRITON does not contain a KORG PC IF, do not select [KORG PCIF].

4Press the [Out Port Setting] button.

The following dialog box will appear. Here you can select the MIDI channels/messages which will be output to each port. Only those channels/messages whose box is checked will be output.

5When you have finished making settings, click the [OK] button.

6Start up your MIDI application (sequencer), and

drag the mouse from the of the your MIDI appli- cation’s Out Port to connect it to the MIDI Out of the MIDI Driver.

For details on using PatchBay, refer to “About PatchBay...” etc. in the Apple menu.

Appendices

Korg MIDI Driver

131