Korg Speaker System owner manual Multisample editing, Converting a multisample to a program

Multisample editing

Editing a multisample consists of creating indexes for the multisample and assigning a sample to each index (these basic settings can also be performed in P0), edit- ing operations such as deleting, copying, and inserting indexes, and detailed settings such as sample level and pitch for each index.

Multisample editing is performed in P3: Multisample.

Editing the indices

To change the number or order of the indexes, use the Insert, Cut, Copy, and Create buttons.

1Press P3: Multisample.

2Use Multisample (MS) to select the multisample that you wish to edit.

3Select the “index.”

You can also select an index by holding down the [ENTER] key and playing a note on the keyboard.

4Press the buttons to modify the number or order of the indices, and edit them.

To delete the selected index, press the Cut button. The Insert button is used in conjunction with the Cut and Copy buttons. The contents of the index that was Cut or Copied will be inserted.

The Create button has the same function as the Cre- ate button in P0: Recording (☞p.81 “Creating multi- sample indexes and sampling”).

Modifying the settings of an index

1Make the settings described in steps 1–3of “Editing the indexes.”

2Set parameters for the selected index.

For details on each parameter, refer to p.96 in the Parameter Guide.

•Changing the “Top Key” will change the upper limit of the zone. Simultaneously, the lower limit of the next-numbered index will also change.

•If you check “Constant Pitch,” all notes in the index zone will sound the sample at its original pitch.

•“Pitch” adjusts the sample pitch for each index. You can use the “Pitch BPM Adjust” page menu command to set the loop interval to a desired BPM value (☞p.97 in the Parameter Guide).

Converting a multisample to a

program

In pages P0–P4, you can select and execute the “Con- vert MS To Program” page menu command. When you execute this command, the settings of the currently selected multisample will be converted into a program. In Program mode you can make filter, amp and effect settings etc., and play the sample as a program. The resulting program can be used in a combination or song.

For details on the “Convert MS To Program” page menu command (☞p.84 in the Parameter Guide).

84