Korg Speaker System owner manual Arpeggiator-A, Arpeggiator-B, Other settings for the arpeggiator

Arpeggiator-A, Arpeggiator-B

For each arpeggiator A and B, you can make settings for “Pattern Select,” “Resolution,” “Octave,” “Sort,” “Latch,” “Key Sync,” and “Keyboard.” (☞p.96)

Other settings for the arpeggiator

You can also set “Gate,” “Velocity,” “Swing,” and “Scan Zone.” These parameters are set in Combination P7: Arpeggiator (☞p.99).

Linking the arpeggiator to combinations

You can specify whether the arpeggiator settings writ- ten in a combination will also be selected when you switch combinations, or whether the arpeggiator status will not change when you switch combinations.

With the factory settings, the former is selected. Use the latter when you want to keep the same arpeggio pattern running, and change only the combination sound.

This setting is made in “Auto Arpeggiator” (Global P0: Basic tab).

Creating an user arpeggio pattern

Arpeggio patterns that you create can be written to U000–231.

These can be created in Global P6: User Arpeggio (☞p.100).

Checking the structure of a user arpeggio pattern

Combination B063: Echo Jamm

1Select combination B063: Echo Jamm, and look at the Arpegg. A tab and Arpegg. B tab.

•Arpeggiator A is assigned to T (timbre) 4, and arpeggiator B is assigned to T (timbre) 2. When you play the keyboard, the T4 program B068: Drum’n’Bass Kit will be sounded by the U168: Bigbeats 1 arpeggio pattern. The T2 program B053: Funkin’ Guitar will be sounded by the U096: Stab Rhythm arpeggio pattern.

•If you uncheck “Arpeggiator Run A” or “Arpeggiator Run B,” the unchecked arpeggiator will stop.

If you check it once again and play the keyboard, the arpeggiator will begin running.

•The “Scan Zone Key” is set so that notes B3 and below will use arpeggiator A, and notes C4 and above will use arpeggiator B. (These settings are made I Combination P7: Scan Zone A/B tab parameters A and B, “Top Key” and “Bottom Key.”)

32