Korg Speaker System owner manual Listening to a demo song, Loading the demo song data in Disk mode

Listening to a demo song

Here’s how to listen to a demo song on the TRITON.

Contents of the disks

The TRITON series comes with two floppy disks (TNFD-00P and TNFD-01P).

PRELOAD.PCG

•Preloaded data (programs, combinations, drum kits, arpeggio patterns, global settings)

•Program data (programs using the sampling function) used by the demonstration songs

When you load PRELOAD.PCG, it will be written into internal memory. This data is preserved even if the power is turned off.

When you load PRELOAD.PCG, the data that had been written before loading this data will be rewritten. If you wish to keep this data, you must first save it on a floppy disk before loading PRE- LOAD.PCG (☞p.40).

PRELOAD.SNG

•Demonstration song and demonstration cue list data

When you load PRELOAD.SNG, it will be written into internal sequencer memory. This memory is volatile, and the data will be lost when the power is turned off.

When you load PRELOAD.SNG, the data that had been written before loading this data will be rewritten. If you wish to keep this data, you must first save it on a floppy disk before loading PRE- LOAD.SNG. (☞p.40)

PRELOAD.KSC

•Sample program data used by the demonstration songs

When you load PRELOAD.KSC, its multisample/ sample data will be written into the TRITON’s multisample/sample memory. This memory is volatile, and the data will be lost when the power is turned off.

Whether or not previously-written data will be erased when you load PRELOAD.KSC is deter- mined by the “Select .KSC Allocation” setting. Refer to step 7 of the following procedure.

1.Loading the demo song data in Disk mode

1 Insert the included “TNFD-00P” floppy disk into the disk drive.

For details on handling a floppy disk and inserting it into the disk drive, refer to “Disk mode” ☞p.95.

2 Press the [DISK] key (the LED will light).

You will enter Disk mode.

3Press the Load tab.

The Load window will appear, and file information will be displayed.

4Press “PRELOAD.SNG.”

The display will be highlighted. This is the demo song data.

5

4

3

5Press the page menu command button.

The page menu commands will be displayed.

6Press “Load selected.” A dialog box will appear.

7Press the check boxes to add a check mark.

Check “Load PRELOAD.PCG too.” When the data is loaded, the .PCG file will be loaded along with the .SNG file.

Check “Load PRELOAD.KSC too.” When the data is loaded, the .KSC file will be loaded along with the

.SNG file.

18