Korg Speaker System owner manual COMPARE key, Popup buttons and popup menus, Keyboard input

G001	Acoustic Piano
g(1) 001	Acoustic Piano w
g(2) 001	Acoustic Piano d
g(3) 001	*Acoustic Piano
g(4) 001	*Acoustic Piano
	:
g(9) 001	*Acoustic Piano
g(d) 001	STANDARD Kit
G001	Acoustic Piano
	:

[COMPARE] key

Use this key when you wish to compare an edited pro- gram or combination sound with the un-edited origi- nal (i.e., the sound that is written into memory).

When editing a program or combination, press this key. The LED will light, and the last-written settings for that program number or combination number will be recalled. When you press the [COMPARE] key once again, the LED will go dark and you will return to the settings that you were editing.

If you edit the settings that are recalled by pressing the [COMPARE] key (i.e., the settings that are written into memory), the LED will go dark, and it will not be pos- sible to return to the previous settings by pressing the [COMPARE] key again.

In Sequencer mode, you can use the [COMPARE] key to make “before and after” comparisons immediately after using realtime recording or step recording to record a song, or after performing a track edit opera- tion.

For example, this can be used effectively when real- time-recording a track for a song.

1Realtime-record a track. (Take 1)

2Once again, realtime-record on the same track. (Take 2)

3Press the [COMPARE] key. The LED will light, and take 1 will be recalled.

4Press the [COMPARE] key once again. The LED will go dark, and take 2 will be recalled.

5If at step 3 you once again realtime-record on the same track (take 3), the object of the Compare function will now be take 1. If at step 4 you once again realtime-record on the same track (take 3), the object of the Compare function will be take 2.

In this way, the Compare function lets you recall the previous recording or the previous state of event edit- ing.

The Compare function is not available Sampling, Song Play, or Global modes.

Popup buttons and popup menus

You can press a popup button to access a popup menu, and then set parameter values (☞p.10).

Keyboard input

When inputting a note name or velocity value as the value of a parameter, you can use the keyboard to input the setting. Hold down the [ENTER] key and play the note that you wish to enter as a value. The note name (number) or velocity value will be input.

When the Global P5: DrumKit page is displayed, you can hold down the [ENTER] key and play a note to recall the settings that have been assigned to the note you played.

In Sampling mode, you can hold down the [ENTER] key and play a note to recall the index that is assigned to the note you played.

14