Korg Speaker System Korg MIDI Driver settings, Setting up the Korg MIDI Driver Win- dows

Click the [OK] button, and then click [OK] again.

6Make settings as described in “Setting up the Korg MIDI Driver” (below), and click the [OK] button.

7Be sure to restart your computer so that the new driver becomes effective.

2“KORG PC I/F MIDI Port Properties” will appear. Click the [Settings] button.

3Make settings as described in “Setting up the Korg MIDI Driver” (below), and click the [OK] button. If you change the settings, you must restart Windows.

Korg MIDI Driver settings

1In “Control panel,” double-click the “Multimedia” icon, and the “Multimedia Properties” dialog box will appear.

Click the “Advanced” tab located at the upper right. Click the [+] located at the left of “MIDI Devices and Instrnments” (the display will change to [–]), and click “KORG PC I/F MIDI Port.”

Then click the [Properties] button.

Setting up the Korg MIDI Driver (Win- dows)

1For Serial Port, select the serial port (“COM1” to “COM4”) to which the TRITON is connected. If you wish to use the serial port for a different purpose after installing the Korg MIDI Driver, you can either select “None” to disable the driver, or “Delete” the driver and restart Windows.

2If “Independent Synth/MIDI Out” is not checked, data that is output to Default MIDI will be sent both to the tone generator and to MIDI OUT. If “Indepen- dent Synth/MIDI Out” is checked, the operation will depend on the model of tone generator that you are using.

Since the TRITON does not support this function, do not check Independent Synth/MIDI Out.

3Synth Out Messages allows you to select the mes- sages that will be transmitted to the TRITON. MIDI Out Messages allows you to select the messages that will be output from the MIDI OUT of the tone gen- erator.

130