SX5D Location and Setup, Connect the Handset | Telular SX5D GSM

Battery Operation

The unit will not automatically switch from AC to battery upon loss of AC power. You must manu- ally change the AC/Battery switch to battery operation. Battery power will provide up to two hours of talk time and 72 hours of standby.

SX5D Location and Setup

The SX5D comes with a standard spike antenna (TNC).

1)Select a location that is above ground and as close to windows (or exterior walls) as possible to get the best signal - see Figure 5.

2)Attach and finger-tighten the antenna; do not over-tighten - see Figure 6.

Figure 5 - Attach the antenna.

Figure 6 - SX5D location.

Connect the Handset

Before you can use the SX5D, you must connect the handset cable.

1)Connect the handset cable to the phone jack - see Figure 7.

2)Connect the handset cable to the handset.

Phone jack

Handset cable

Handset

Figure 7 – SX5D handset connection.

Phonecell® SX5D GSM

9

Technical Manual

Image 9

Telular SX5D GSM technical manual SX5D Location and Setup, Connect the Handset, Battery Operation

Contents

Phonecell SX5D GSM Fixed Wireless Phone Quick Connection GuidePhonecell SX5D GSM Phonecell SX5D GSM SX5D Menu Structure Main Menu Settings Contents Safe Operation InstructionsImportant Notices Table of Contents Digital Data Service SIM Card Installation SetupInstall Batteries Emergency Batteries SX5D Location and Setup Battery OperationConnect the Handset Attach the Optional Wedge Optional Wedge SX5D mounting hooks Wall-Mounting SX5D AC power connection Connect the SX5D to AC Power Getting to Know Your SX5D SignalFunction Keys LCD Display Icons Full Service Service IndicationNo Service Limited Service Making Calls Call FunctionsReceiving Calls Ending Calls SX5D Basic Features Date and Time SettingsAudio Settings Phonebook Speakerphone Speed Dialing Call Logs SX5D Additional Features Personalization Options Alarm Settings Network Settings Call Barring SIM PIN Setup Outgoing Call Barring Bar Incoming Calls if Abroad, via the NetworkBar All Outgoing Calls, via the SX5D Handset Bar Outgoing Calls, via the Network Restricted Dialing Dial Delay Auto Dial Restore Factory DefaultsIn-Call Dtmf Phone Security Call Divert Forwarding Supplementary Services Network DependentCall Waiting Multiparty Calling Voicemail Caller ID Settings Short Message Service SMS View Saved Messages Message Settings Message LifetimeSend Saved Messages Message Format Information Messages Select Settings, the select Set languagesIn-Call Options Set Information Subjects Standard Modem Setting Digital Data ServicePC Data Connection Sending and Receiving Digital Fax Personal Least Cost Routing LCR Option Connecting a Rotary Phone to the SX5DConnect SX5D to the Landline Pstn Connect Additional Phones to SX5D Select Settings, then select Extension Settings Set the LCR DefaultMake Calls via the Secondary Service Prefix Connect SX5D for Dual Jack Mode Analog Fax SetupConnect SX5D for Single Jack Mode Analog FAX Option Service Settings Technician Commands Safety Information Children AircraftBlasting Areas Potentially Explosive Atmospheres What this Warranty Covers and for HOW Long Warranty Trademarks Patents Requirements Modem Setup Phonecell SX5D GSM Phonecell SX5D GSM Phonecell SX5D GSM Phonecell SX5D GSM Phonecell SX5D GSM