Setting up
1 - CONNECTING THE TELEPHONE
-Connect the handset cord.
-Open the battery compartment.
Insert 4 alkaline batteries without mercury (Type
AAA1.5V, not supplied) in the compartment (*). Bat- teries are required if you wish to increase the ringer level up to 10 dB.
Snap the battery door back in place.
- Connect the line cord plug to the line socket on the base (*).
Connect the other end of the line cord to the PTT socket. (*)
2 - RINGER SETTINGS
A switch located on the upper side allows the ringer to be switched HI,LOW,OFF:
: Off,
: Low,
: Hi
(*) Classified
6
