Setting up

3 - TONE/PULSE SWITCH (T/P)

The Tone/Pulse switch is factory pre-set to Tone position (T). In UK, all telephone exchanges now use Tone dialling. If your phone does not dial out, it is probably being used from an older private switch- board (PBX). In this case, theTone/Pulse switch must be moved to Pulse.

4 - TIME BREAK RECALL (TBR) SWITCH

For UK, the TBR switch should be set to 100 mS. It can be switched to 300 mS for other locations or PBX’s.

Note: If you are using your CL1100 with a hearing aid, set your hearing aid to “T” position.

5 - WALL MOUNTING

To wall-mount your telephone, slide out the clip, turn and slide back into the wall mounting position

8

Page 8
Image 8
Geemarc PhotoPhone manual TONE/PULSE Switch T/P, Time Break Recall TBR Switch, Wall Mounting