5 TROUBLESHOOTING
Problem | Possible Solution |
|
|
There are black bars | This may occur on a 4:3 TV if the 4:3 OVERRIDE setting is OFF. To set 4:3 SD |
on all four sides of the | programming to fill the screen, depending on the capabilities of the TV, set |
picture | 4:3 OVERRIDE to 480i or 480p. |
| This may occur on a 16:9 TV if the active video for an SD broadcast is in letterbox format. |
| To confirm, wait for a commercial or look for a graphic, such as a network logo. If the |
| commercial fills the screen from top to bottom, or the graphic appears below the active |
| video, the program is being letterboxed by the broadcaster. You can minimize this by |
| activating the zoom feature on the TV. |
| A broadcaster may include black bars on either side of a wide screen broadcast. This is |
| called a “hybrid” aspect ratio and results in a black border surrounding the video on a 4:3 |
| TV. Because this is part of the broadcast, the DCH3200 cannot correct the video. You |
| may be able to minimize the border using the zoom feature on the TV. |
|
|
Colors do not appear | Be sure to match up each signal to the same YPbPr connection on the TV. Otherwise, |
correctly | colors will not appear correctly on your TV. |
|
|
61