Motorola DCH3200 installation manual Separable Security

4 DIAGNOSTICS

Separable Security

This diagnostic displays information on the inserted M-CARD and CableCARD Interface with the DCH.

Field	Description
CARD Interface	CableCARD Interface is a status indication of the interface between the Host
	and CableCARD. It will indicate ‘Good’ if no errors are detected, ‘Error’ if
	there is an error establishing the CableCARD interface , or ‘Unsupported
	CARD’ if the inserted CableCARD is not an M-CARD.
CableCARD ID	The unique identifier provided by the CableCARD.
Host ID	The unique identifier in the Host Device Certificate.
Data ID	A value generated by the CableCARD for the Pairing report.
Validation	• UKNOWN if a Validation message was not received by the product.
	• VALID or INVALID as set by the Host Validation Message received
	from the headend.
	• BINDING if the CableCARD is busy with the binding authentication
	process.
	• NOT BOUND if Card validation status in not bound for CableCARD
	reasons.
	• HOST CERTIFICATE INVALID if the status is not bound because
	the Host Certificate was invalid.
	• HOST SIGN FAILED if status is not bound because of failure to
	verify Host’s SIGN.
	• AUTH KEY FAILED if status in not bound because of failure to
	match AuthKey from the Host Device.
	• FAILED if binding failed for other reasons.
Pairing Rpt Method	Set to ‘MMI’ or ‘Reportback’ as received by a message from the headed, or
	set to ‘Unknown’ if the headend message was not received.
MSO Phone Number	MSO Phone Number as configured at the headend.
CableCARD

32