Motorola DCH3200 installation manual In-BandStatus, 4DIAGNOSTICS

Models: DCH3200

1 72
Download 72 pages 57 Kb
Page 38
Image 38
4DIAGNOSTICS

4DIAGNOSTICS

4.If the frequency is found with the proper EMM Provider ID, then the Front Panel will display the normal OOB receiver status. The OSD “LKC” field will change to display the new frequency.

5.If after 40 seconds the frequency search is not successful, the product will perform a warm reset.

6.To abort a search without waiting the 40 seconds, the POWER key can be pressed to cause an immediate warm reset.

Note: The Front Panel will display “hunt” after a cold reset from the front panel. This indicates that the product is in a Round Robin Hunt Mode. “hunt” will continue to be displayed until the proper stream is detected.

In-Band Status

This diagnostic displays the in-band status for the last attempted tuned channel. The information is updated every 5 seconds.

28

Page 38
Image 38
Motorola DCH3200 installation manual In-BandStatus, 4DIAGNOSTICS