Motorola DCH3200 Diagnostics, Field, Description, MAC Abort, Cntr, Socket Port, State

4 DIAGNOSTICS

Field	Description
	I dc		INIT_WAIT_DC_O	The DCH3200 is in the interactive initialization state and
			R_C	waiting for the default configuration or the contention
				channel list messages.
	I L		WAIT_LM_ACK	The DCH3200 is in the interactive initialization state and
				waiting for Link Management Response ACK for Local
				Address Message.
	I SO		WAIT_SO_ACK	The DCH3200 is in the interactive initialization state and
				waiting for a Sign On acknowledgement.
	I LA		WAIT_LA_OR_SO	The DCH3200 is in the interactive initialization state and
				waiting for Logical Address or Sign On with verification
				Frequency message.
	S I		INIT_STOPPED	The DCH3200 is in the interactive initialization state and the
				TransMode has stopped.
	r dc		RUN_WAIT_DC_O	The DCH3200 is in the interactive state and waiting for the
			R_C	default configuration or the contention channel list
				messages.
	r		RUNNING	Interactive state is running, sending idle messages, and
				waiting for any prepare for poll or MAC messages.
	S		RUN_STOPPED	The interactive run state has stopped and DCH3200 is
				waiting for status or a transmission control message.
	00		INVALID	The interactive state is unknown or invalid.
MAC Abort	This counter increments every time the MAC layer reaches the cell abort count limit. It is
Cntr	reset by the successful upstream transmission of a cell: for example, when the DCH3200
	receives an ACK. If the counter reaches the MAC abort count limit, the DCH3200 assumes
	the MAC layer is unavailable due to noise, congestion, or some other problem. The
	DCH3200 stops transmitting data upstream, reports an error to the calling function, and
	attempts to re-enter the network using the initialization process. 0000 is displayed as the
	default or if the MAC Abort CNTR is not configured or unknown.
Socket Port	The socket mode and activity:
State		• UNUSED — The socket is not being used.
		• OPENED — The socket is open.
		• READY — The socket is ready to send or receive.
		• RECEIVING — The socket is receiving data from the application server.
		• SENDING — The socket is sending data to the application server.
		• UNKNOWN — The socket state is invalid or unknown.

56