Motorola DCH3200 Operational Check for the Remote Control, Optimizing the High-DefinitionSettings

3 INSTALLATION

Operational Check for the Remote Control

The operational check tests communication with the remote control:

Table 3-1 Operational check procedures

Feature	Testing Procedure
Power on	Press POWER on the remote control to turn on the DCH3200.
	Tune to the output channel (3 or 4) if using the RF output.
Channel selection	Scan through the channels using the CHANNEL + or - keys.
	Tune to several channels by entering the channel number using the
	numeric keys.
Volume control	Press VOLUME + or - on the remote control to increase the volume to
	its upper limit, lowest level, and to a comfortable level.
	Press MUTE to turn the sound off. Press MUTE again to restore the
	sound.

If the DCH3200 does not operate properly, refer to the Troubleshooting section.

Optimizing the High-Definition Settings

This subsection describes how to optimize SD and HD video settings and closed captioning based on subscriber preferences.

Before you optimize the output settings:

•Connect the DCH3200 receiver to other home entertainment devices

•Plug the DCH3200 receiver into a power outlet

•Initialize the DCH3200 receiver and authorize services

•Turn the TV on

For an HDMI connection, be sure the TV is on and connected to the HDMI connector before adjusting the settings. Motorola recommends using HDMI cables less than 20 meters long.

To optimize the output settings:

1.Power off the DCH3200 and then immediately press the MENU key on the front panel. If the TV is on, the on-screen menu lists the settings you can configure:

17