Motorola DCH3200 installation manual The Interactive Status fields are, Diagnostics

4 DIAGNOSTICS

Interactive Status

This diagnostic describes the interactive information that is displayed only when Thin Client platform is running. The information on the OSD and front panel is updated at least once every 5 seconds while the diagnostic is displayed. This is an example of a code module display with status descriptions:

Figure 4-10 Interactive status front panel display

The Interactive Status fields are:

Field	Description
IP Address	The IP address in dotted-decimal format xxx.xxx.xxx.xxx assigned by the NC 1500 to the
	DCH3200. 0.0.0.0 is displayed if the IP address is not configured or unknown.
UPM	The upstream modem address value is the same as the terminal ID assigned by the
	DAC 6000. It is a unique, system-generated, eight-digit integer between 1 and 16777215.
	00000000 is displayed when the UPM is not configured or if it is unknown.
Upstream	A four-digit decimal value from 0000 to 9999 assigned by the DAC 6000 to the DCH3200.
ID	0000 is displayed if the Upstream ID is not configured or if it is unknown.
Downstrea	A four-digit decimal value from 0000 to 9999 assigned by the DAC 6000 to the DCH3200.
m ID	0000 is displayed if the Downstream ID is not configured or if it is unknown.
State	The interactive status of the DCH3200:
	Front	OSD	Description
	Panel
	U	UNCONFIG	The DCH3200 is not configured for the interactive system,
			and the platform should run as pre-interactive.
	C	MAC_CONNECT	The DCH3200 is waiting to establish connection to MAC PID
			Stream.

55