Guide to the appliance
Display
General
The display is used to select or set the following:
–the programme
–the FlexiTimer (Delay start)
–the Settings menu
The display can show the following:
–the current time of day
–the stage the programme is at
–the estimated time left for the pro‐ gramme to run
–the energy and water consumption (EcoFeedback)
–any relevant fault messages and in‐ formation
To save energy, the dishwasher switches off after a few minutes if you do not press any buttons during this time.
To switch the dishwasher back on again, press the button.
Settings menu
The Settings menu is used to alter the dishwasher's electronics to suit differ‐ ent requirements. You access the Set‐ tings menu by pressing a specific but‐ ton combination (see "Settings menu").
The arrows in the display indicate fur‐ ther options. You can use the ar‐ row buttons underneath the display, as appropriate, to select these further op‐ tions.
The OK button is used to confirm a message or setting and also to move to the next menu or another level.
A tick will appear next to the option which is currently selected.
To exit a
If you do not press any of the buttons for several seconds, the display with re‐ turn to the previous level. You may need to enter your settings again.
8