Settings menu
Rinse aid
You can adjust the rinse aid dosage for best results.
The rinse aid dosage can be set from approx.
The factory default setting is 3 ml.
If the function to adjust the Sensor wash programme has been activated, the amount of rinse aid dispensed in the Sensor wash programme can be higher than that set.
If spots appear on crockery and glass‐ ware:
– Increase the rinse aid dosage.
If clouding or smearing appears on crockery and glassware:
–Decrease the rinse aid dosage.
Select the rinse aid dosage you want and confirm with OK.
Consumption (EcoFeedback)
You can programme the dishwasher so that the energy and water consumption of the currently selected programme appears in the display. The estimated consumption can be displayed before the programme starts and the actual consumption can be displayed after the programme has finished.
In this menu you can also call up the to‐ tal energy and water used in all previ‐ ous dishwasher programmes (see "Car‐ ing for the environment, EcoFeedback consumption indicator").
Consumption indicator
Select the (Consumption) Display op‐ tion and confirm with OK.
Select the setting you want and con‐ firm with OK.
Total consumption
Select the Total consumption option
and confirm with OK.
You can call up the values for Energy and Water with the arrow but‐ tons.
You can also reset the values for the to‐ tal consumption to 0.
Select the Reset option and confirm with OK.
Select the Yes option and confirm with OK.
Confirm the message with OK. The values are now reset to 0.
86
