Panasonic AJ-HD1700PE Operation mode speed display, Remaining tape/total tape display, If the

Function menus

<HOME> Status display 2

Indicator	Description of setting
SCH	This lights when the SCH phase of the SDREF
	signal is within the prescribed range.
CF	This lights when color framing is locked.
DF	This lights during recording or playback in the
	drop frame mode.
	<Note>
	If the time code data could not be read properly
	(“T ¢R” is displayed), the display of the previous
	status is held.

Operation mode (speed) display

This indicates the current operation mode (including the speed display).

	Display			Operation mode
EJECT			Eject mode
STANDBY OFF			Standby OFF mode
T.RELEASE			Tension release mode
STOP			Stop mode
PREROLL			Preroll mode
PLAY			Playback mode
PLAY	i		Special	playback	(playback	phase
			adjustment) mode (FWD direction)
PLAY	j		Special	playback	(playback	phase
			adjustment) mode (REV direction)
REC			Recording mode
JOG			Jog mode
REV/STILL/FWD
VAR (speed)			Variable mode
[j4.9to i4.9]
SHTL (speed)			Shuttle mode
[j32.0 to		i32.0]
FF			Fast forwarding mode
REW			Rewinding mode
EDIT			Editing mode
AUTO EDIT			Automatic editing mode
PREVIEW			Preview mode
REVIEW			Review mode
When function F6 (VARMEM) on <HOME SHIFT> is “ON”
DSPD (speed)			Initial speed setting of variable memory
[j1.0 to		i2.0]
DSMP (speed)			Playback speed memory mode of variable
[j1.0 to		i2.0]	memory
DPLY (speed)			Playback mode of variable memory
[j1.0 to		i2.0]
DPRV (speed)			Preview mode of variable memory editing
[j1.0 to		i2.0]
DEDT (speed)			Execution mode of variable memory editing
[j1.0 to		i2.0]

Remaining tape/total tape display

The lengths of the remaining tape and total tape of the inserted cassette are displayed in increments of minutes.

Example: REM 10/ 92 (10 minutes remaining on a 92-minute tape)

Total tape

Remaining tape

<Note>

Slight errors may occur. The remaining tape value blinks when less than 3 minutes of the tape remain.

Cue time display

This displays the currently registered cue time. (For details on the cue time operation, refer to “Cue point registration, preroll and cue-up.”)

Cue time operations can be performed on the HOME screen only.

Time counter displays

	Display	Description
CTL		CTL counter data
TCG		Time code data of time code generator
UBG		User’s bit data of time code generator
tcg		When the time code data of time code
		generator is preset
ubg		When the user’s bit data of time code
		generator is preset
TCR/T	¢R	Time code data of time code reader
UBR/U ¢R		User’s bit data of time code reader

If the time code data or user’s bit data could not be
read out properly, “T	¢R” or “U ¢R” is displayed.	If the
CTL signal is present,	the time code data is
supplemented by CTL.
TCR 00:00:00:00.	Field mark
	[1st field: “ ”/2nd field: “.”]
	(This does not appear when the	i0.3 k or
	j0.3 k speed is exceeded.)
	Drop frame mark (59/60 Hz mode only)
	[Non-drop frame mode: “:”/drop frame
	mode: “.”]

Variable memory mode indicator

This is displayed when the	(VARM	F6	function
button on <HOME SHIFT> is set to “ON.”				While
					VM
is lighted, variable memory operations can				be
performed at any time.
(For details, refer to “Variable memory function.”)

44