Parts and Their Functions
Time code display
6
4
SHIFT |
|
| F1 |
|
| F2 |
5
3Time counter display
CTL: |
| CTL counter data |
TCG: |
| Time code data of time code generator |
UBG: |
| User’s bit data of time code generator |
tcg: |
| When the time code data of the time |
|
| code generator is preset |
ubg: |
| When the user’s bit data of the time |
TCR/T | ¢R: | code generator is preset |
Time code data of the time code reader | ||
UBR/U ¢R: | User’s bit data of the time code reader | |
If the time code data or user’s bit data could not be
read properly, “T ¢R” or “U ¢R” appears on the display and, if the CTL signal is present, the time
code data is supplemented by this signal.
TCR 00 : 00 : 00 : 00.
(59/60 Hz mode only)
Drop frame marks:
“: ”:
“. ”: Drop frame
Field marks
“”: 1st field
“. ”: 2nd field
(These marks are not displayed at any
speed above | w0.3 k.) |
3
F3 |
| F4 |
| F5 |
| F6 |
4Variable memory mode indicator
This is displayed when “ON” has been selected as
the F6 (VARMEM) setting on the <HOME SHIFT> menu.
While VM is lighted, variable memory operations can be performed at any time. (For details, refer to the “Variable memory function” on page 36.)
5Back page menu indicator
6Function button operation inhibited indicator
This is displayed when the | button | BS |
| |||
while the |
|
| is held down. | When it appears, | ||
buttonF |
| |||||
the operation of the function buttons can be
inhibited. | When the |
|
|
|
| ||
| BS | is pressed again | |||||
|
|
|
|
|
|
|
|
while the |
|
|
| is held down, |
| the display is | |
| F | button | |||||
cleared, and it becomes possible to operate the function buttons.
17
