INPUT CHECK output specifications, VIDEO 50 Hz mode

Parts and Their Functions

Front panel

INPUT CHECK output specifications

<Notes>

•The AJ-UC1700G (optional accessory) is required to select the SD SDI input signals.

•The AJ-YAC150P (optional accessory) is required to select the SDTI input signals.

•When the INT SG input signal is selected, the signals are selected by menu item No.601.

•When the 23/24 Hz mode or 25 Hz (HD or SD) mode is selected, the INPUT CHECK operation is not performed.

*When the SDTI input is selected, the INPUT CHECK operation is not performed.

Output system		MONITOR (L, R) selection

	CH1 to CH8		CUE
	CH1 to CH8		CUE

	Audio input which has been		Same as main
MONITOR L	set by the channels selected		Same as main
MONITOR L	set by the channels selected		system*	1
	as L channels*	2		1




	Audio input which has been		Same as main
MONITOR R	set by the channels selected		Same as main
MONITOR R	set by the channels selected		system*	1
	as R channels*	2	system*	1
	as R channels*	2

	Audio input which has been		Same as main
HEAD PHONE L	set by the channels selected		Same as main
HEAD PHONE L	set by the channels selected		system*	1
	as L channels*	2	system*	1
	as L channels*	2

	Audio input which has been		Same as main
HEAD PHONE R	set by the channels selected		Same as main
HEAD PHONE R	set by the channels selected		system*	1
	as R channels*	2	system*	1
	as R channels*	2

HD SDI (MONITOR)		Same as main system*	1 *3
(embedded audio)		Same as main system*	1 *3
(embedded audio)

SD SDI (MONITOR)		Same as main system*	1 *3
(embedded audio)		Same as main system*	1 *3
(embedded audio)

*1: The INPUT CHECK operation is not performed. The signals
corresponding to the VTR operation mode are output.
*2: This is set using setup menu items No.713 to 724. However,
the INPUT CHECK operation is not performed when video
input SDTI is selected.
*3: Noise may occur if the video input and OUTREF signals are
not synchronized.