Panasonic AJ-HD1700PE operating instructions Tape Protect

Setup menus

<TAPE PROTECT>

No./Item

Description of setting

400

For selecting the duration of the time taken

after the VTR is left standing in the STOP or

STILL TIMER

search

STILL

mode

(JOG,

VAR

or

SHTL)

before

the

tape

protection

mode

is

established.

(Units: s = seconds, min = minutes)

0000

0.5s

0001

5s

0002

10s

0003

20s

<Note>

0004

30s

0005

40s

When a DV or DVCAM tape is

0006

50s

used,

the

time

is

set to 10

0007

1min

seconds even when a setting of

0008

2min

2 (10s) or longer is selected.

401

For selecting the operation to be performed

when the tape protection mode is established

SRC

after the VTR

has

been left standing

in

the

PROTECT

STILL status in a search mode (JOG, VAR or

SHTL).

0000

STEP

:

STEP FWD

0001

HALF

:

Half-loading

0002

T-REL

:

Tension release

<Notes>

• When

STEP FWD is selected, the VTR is

automatically transferred to the standby OFF (half-

loading) mode after it has been left standing in the

STILL status for a total of 30 minutes (or 1 minute in

the case of a DV or DVCAM tape).

• When, after tension release has been selected and

the VTR has been transferred to the tension release

mode, the VTR has been left standing in this mode

for a total of 2 hours, it is automatically transferred to

the standby OFF (half-loading) mode. However, in

the case of a DV or DVCAM tape, the transfer to the

tension release mode is inhibited, and the VTR

operates as if STEP FWD has been selected.

402

For selecting whether the drum is to operate

in the standby OFF (half-loading) mode.

DRUM STDBY

0000

OFF

:

The drum stops rotating.

0001

ON

:

The drum continues to rotate.

<Precaution for STILL TIMER item setting>

The cumulative total standby time passed in the same location increases at such times when the same material is repeatedly used as is the case when programs are transmitted, for example.

The underlining (__) denotes the factory setting mode.

No./Item				Description of setting
403	For selecting the operation to be performed
	when the tape protection mode is established
STOP	after the VTR				has been left standing in the
PROTECT	STOP mode.
	0000		STEP		:		STEP FWD
		0001		HALF		:	Half-loading
	0002		T-REL		:		Tension release
	<Notes>
	• When		STEP FWD is selected, the VTR is
		automatically transferred to the standby OFF (half-
		loading) mode after it has been left standing in the
		STOP mode for a total of 30 minutes (or 1 minute in
		the case of a DV or DVCAM tape).
	• When, after tension release has been selected and
		the VTR has been transferred to the tension release
		mode, the VTR has been left standing in this mode
		for a total of 2 hours, it is automatically transferred to
		the standby OFF (half-loading) mode. However, in
		the case of a DV or DVCAM tape, the transfer to the
		tension release mode is inhibited, and the VTR
		operates as if STEP FWD has been selected.

90