Clearing registered points, Search operations

Function menus

<CUE>

Clearing registered points

When
	F5(AL CLR) on the <CUE> menu is pressed

while the	buttonF	is held down, all the cue point data

currently selected is cleared. The range of the points which are cleared is as follows depending on the

setting for F3(PAGE) on the <CUE SHIFT> menu.

When “MANU” is set:

All the points on the currently selected page are cleared.

When “AUTO” is set:

All the points on all the pages are cleared.

After clearing,		the search and registered points
appear as follows depending on the setting for
(PAGE) on the <CUE SHIFT> menu.
When “MANU” is set:
A return	is made	to the top (CUE			¢1) of the page
concerned.
When “AUTO” is set:
A return is made automatically to the top (CUE01) of
the first page.
* Points	are	cleared whether “ENTRY” (cue point
registration mode) or “SEARCH” (search mode) is selected
as the setting for				](MODE) on the <CUE> menu.
			F3

$Clearing individual registered points
When the
When the		F4(CLR) button on the <CUE> menu is

pressed, the currently selected cue point data is
cleared.
* The point is cleared only when “ENTRY” (cue point
registration	mode) is selected as the setting for			]
registration	mode) is selected as the setting for		F3	]
(MODE) on the <CUE> menu.

Turn the ADJUST dial to highlight	the desired
registered point.
When the PREROLL button is pressed, the preroll
operation is initiated. The tape will not be prerolled if
no cue points have been registered.
Since the tape is not prerolled even if the PREROLL
button is pressed when the cue point	registration
mode is established, be absolutely sure to check that
the search mode is established.
(The time selected by the <CUE SHIFT> menu
(The time selected by the <CUE SHIFT> menu		[F5
(CU-ROL) setting, which is different from the normal
preroll time, takes effect as the preroll time in this
mode.)

Function	Switching				Setting	Corresponding setup	Description of setting
button/item	method				Setting	menu item	Description of setting
button/item	method					menu item


F1	Press		___			___	For multi-cue page forward scrolling.
PREV

F2	Press		___			___	For multi-cue page reverse scrolling.
NEXT

F3	Toggle			SEARCH		___	For selecting the search or cue point registration mode.
MODE				ENTRY

F4	Press		___			___	For clearing the currently selected cue data.
CLR							ENTRY must be selected as the F3 (MODE) setting.

F5	FiPress		___			___	When MANU is selected by SHIFT + F3 (PAGE): All the cue
AL CLR							data on the currently displayed page is cleared.
							When AUTO is selected by SHIFT + F3 (PAGE): All the cue
							data on all the pages is cleared.

F6	___		___			___	___
___

F2 (SHIFT)	FiPress		___			___	For calling the MULTI CUE file operation menu.
CARD

F3 (SHIFT)	Toggle			MANU		No. 131	Refer to the setup menu.
PAGE				AUTO		PAGE MODE

F4 (SHIFT)	Toggle			OFF		No. 132	Refer to the setup menu.
ROTATE				ON		ROTA MODE

F5 (SHIFT)	Toggle	i		0s --- 5s ---		No. 011	Refer to the setup menu.

CU-ROL	ADJ			15s		CU-ROLL TIME

F6 (SHIFT)	___		___			___	___
___

*The underlining (__) denotes the factory setting mode.

*This item is not displayed when the 23/24 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting.