Panasonic AJ-HD1700PE Return format VTR controller PC, Error code table, Send command, data

RS-232C interface

3. Return format

[VTR > controller (PC)]

The following responses are made to the commands. If necessary, more than one response is made.

∫When the communication has ended successfully

1. The receive completion message is returned.

[ACK]

06h

2.The execution completion message is returned.

4. Error code table

ER001: Invalid command

•Unsupported command received

•Command execution error

ER002: Parameter error

ER102: VTR mode error (front loading motor)

ER103: VTR mode error (loading motor)

ER104: VTR mode error (drum, capstan system)

ER105: VTR mode error (reel system)

ER106: VTR mode error (tension system)

ER108: VTR condensation error

ER1FF: VTR system error

[STX]	[command]	[data]			[ETX]
02h	XX XX XX	XX	.....	XX	03h

[command]:

This is the message (data) which is returned or the execution completion message identifier.

[data]:

This is the data to be returned. It can be omitted.

Example:

Send command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Return message (data)

[STX] OPL [ETX] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 [ACK] [STX] OPL [ETX]

∫When the communication has ended unsuccessfully

[NACK]

15h

∫When processing is not possible due to incorrect data or problem with the VTR

1.The receive completion message is returned.

[ACK]

06h

2. An error code is returned.

[STX]	[E R N1 N 2 N 3 ]	[ETX]
02h	Error code	03h

124